DAF CF65 Series Service Manual page 351

4
CF65/75/85 series
4.3 REMOVAL AND INSTALLATION OF EXHAUST BRAKE
Removing the exhaust brake
1. Disconnect the air connection from the
exhaust brake cylinder (8).
2. Remove the heat shield (5).
3. Remove the nuts attaching the exhaust
brake (4) to the turbocharger (7).
4. Remove the clamping strip from the exhaust
pipe (3).
5. Remove the entire exhaust brake (4).
Installation, exhaust brake
1. Check the butterfly valve for smooth
operation.
2. Check the sealing faces of the exhaust brake
(4) and the exhaust pipe (3).
3. Clean the attachment bolts and apply heat-
resistant grease to the threads.
4. Position the exhaust brake (4) between the
turbocharger (7) and the exhaust pipe (3).
5. Secure the clamping strip of the exhaust pipe
(3), attach the turbocharger (7) on the
exhaust manifold flange and secure the
attachment nuts to the specified tightening
torque. See "Technical data".
6. Fasten the heat shield (5) and tighten the
attachment bolts to the specified torque. See
"Technical data".
7. Check the setting of the exhaust brake; see
"Inspection and adjustment".
©
200324
https://www.truck-manuals.net/
XE ENGINE, ENGINE BRAKE
Removal and installation
2 7 6
3 1
4 5
8
i400671
4-5
10