DAF CF65 Series Service Manual page 20

TECHNICAL DATA
PE engine inlet/exhaust system
5.2 TIGHTENING TORQUES
0
The tightening torques specified in this section
are different from the standard tightening torques
cited in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque cited in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Turbocharger
Heat shield attachment bolts
Turbine housing clamp plate attachment nut
Exhaust manifold flange/turbocharger attach-
ment nuts
Elbow attachment with exhaust brake on turbo-
charger
Oil supply pipe banjo bolt
(1) Use Loctite 243 to secure
(2) Fasten with Copaslip
Glow element
Attachment bolts
Air cooler
Air cooler hose clamps
5-2
30 Nm
15 Nm
60 Nm
40 Nm
90 Nm
30 Nm
10 Nm
https://www.truck-manuals.net/
(1)
(2)
4
series
©
200416