4
series
7.2 TIGHTENING TORQUES
The tightening torques specified in this section
are different from the standard tightening torques
cited in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque cited in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Turbocharger
Heat shield attachment bolts
Turbine housing clamp plate attachment nut
Exhaust manifold flange/turbocharger
attachment nuts
Elbow attachment with exhaust brake on
turbocharger
Oil supply pipe banjo bolt
(1) Use Loctite 243 to secure
(2) Fasten with Copaslip
Glow element
Attachment bolts
Air cooler
Air cooler hose clamps
©
200416
30 Nm
15 Nm
60 Nm
40 Nm
90 Nm
30 Nm
10 Nm
https://www.truck-manuals.net/
TECHNICAL DATA
XE engine inlet/exhaust system
(1)
(2)
0
7-3