DAF CF65 Series Service Manual page 279

4
CF65/75/85 series
4.3 REMOVAL AND INSTALLATION, INJECTOR SLEEVE
Removing the injector sleeve
1. Partially drain the coolant.
2. Remove the injector.
Insert a ball of crumpled paper into the
injector sleeve to prevent metal particles
from entering the engine.
3. Tap a thread (M22 x 1.5) over a length (A) of
approx. 20 mm in the injector sleeve that is to
be removed.
Turn the special tool (DAF no. 1310425) into
the injector sleeve and, using the special tool
(DAF no. 0694928), remove the injector
sleeve.
Installing the injector sleeve
1. Clean the injector sleeve opening
thoroughly.
Note:
Fit the dry injector sleeve in the cylinder
head.
Use the special tool (DAF no. 1329305) to
tap the injector sleeve into the cylinder head.
2. Fit the injector.
3. Top up the cooling system.
4. Start the engine and check the engine for
leaks.
©
200324
https://www.truck-manuals.net/
XE ENGINE FUEL SYSTEM
Removal and installation
A
8
I 400195
4-5