TECHNICAL DATA
CE engine inlet/exhaust system
3.2 TIGHTENING TORQUES
0
The tightening torques specified in this section
are different from the standard tightening torques
cited in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque cited in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Turbocharger
Attachment nuts, exhaust manifold flange/turbo-
charger
Oil discharge pipe attachment bolts
Oil supply pipe union
Turbocharger V-clamp
(1) Fasten with Copaslip
Glow element
Attachment bolts
Air cooler
Hose clamps
3-2
43 Nm
23 Nm
28 Nm
10 Nm
14 Nm
7 Nm
https://www.truck-manuals.net/
(1)
4
series
©
200416