XE ENGINE INLET/EXHAUST SYSTEM
Cleaning
3.
Turn the radiator cleaner over, turning the
holes towards the radiator (2), and blow-
clean the radiator (2).
4.
Fit the wire mesh.
5.
Install the lower grille.
5.2 CLEANING, AIR FILTER ELEMENT
}
Inhalation of dust may have serious
consequences for your health.
Use mouth and eye protection.
1.
Remove the air filter element. See "Removal
and installation".
2.
Check the air filter element for damage. If the
air filter element or its sealing rings are
damaged, the air filter element must be
replaced.
3.
Knock out the air filter element.
4.
Blow-clean the air filter element by blowing
pressurised air through from the inside,
using a maximum pressure of approx. 1.5
bar.
9
5.
Fit the air filter element. See "Removal and
installation".
5-2
https://www.truck-manuals.net/
CF65/75/85 series
3
2
1
4
P
4
M2110
M2009
©
200324