CE ENGINE FUEL SYSTEM
Removal and installation
14. Fit the nut (1). Tighten the nut to a torque of
15 Nm.
15. Tighten the injector attachment bolts to the
specified torque; see "Technical data".
16. Tighten the fuel supply pipe nut to the
specified torque; see "Technical data".
2
17. Connect the injector wiring. Tighten the
attachment bolts (1) to the specified torque.
See "Technical data".
18. Fit the exhaust valve rockers.
19. Adjust the clearance of the exhaust valves.
20. Fit the valve cover.
21. If the fuel rail was removed, re-fit it.
22. Fit the injector pipe.
23. Fit the fuel return overflow valve to the
cylinder head. For the specified tightening
torque, see "Technical data".
24. Connect the return pipe to this valve.
25. Start the engine to bleed the high-pressure
section of the fuel system and inspect the
fuel system for leaks.
5-10
https://www.truck-manuals.net/
4
series
1
i400486
1
i400808
©
200416