BAFANG DP C01.CAN BUS User Manual page 8

7.7.2.4 Controller Information
When the system is on, press and hold
and for 2 seconds to the setting inter-
face, repetitively press (<0.5S)
troller hardware version (CHc) or software
version (CSc) interface (as below).
Press and hold
to exit to the main interface. Or press (<0.5S)
to enter next item "Torque Information".
Hardware version of controller
Software version of controller
7.7.2.5 Torque Information
When the system is on, press and hold
and for 2 seconds to the setting
interface, repetitively press (<0.5S)
torque hardware version (SHc) or software
version (SSc) interface (as below).
Press and hold
er to exit to the main interface. Or press
(<0.5S) to enter next item "Message of
Error Code".
until con-
and button together
until
and button togeth-
Hardware version of torque
Software version of torque
7.7.2.6 Message of Error Code
When the system is on, press and hold
and for 2 seconds to the setting inter-
face, repetitively press (<0.5S)
code interface (as below), and then press
or to view message of error code.
It shows error information for the last ten
times by "E0" to "E9". Error code "--"means
that there is no error.
Press and hold
to exit to the main interface.
8 BF-UM-C-DP C01-EN Novmber 2019
until error
and button together