Cobra G100 Complete Instructions page 15

7.7
•
Engine cut-off alarm.
This allows the alarm function to be added to the automatic engine cut - OFF function
when armed. After 20 s have passed, once the engine cut - OFF function is activated,
turning ON the ignition generates an alarm.
7.8
•
Open door/bonnet/boot warning signal.
When armed, the system emits signals consisting of buzzing and blinking (5 blinks instead
of 2) if any doors and / or the bonnet or boot are open. If it is closed within 25 s, the
system will continue to monitor their status and will signal again if another door / bonnet
/ boot opening occurs later. If the 25 s elapse and the door / bonnet / boot has not yet been
closed, the system will not monitor their status until another closing / opening operation
occurs that triggers an alarm.
7.9
•
Autohazard (switching on indicator lights in the case of emergency
braking).
If activated, the system turns on the four hazard lights if the vehicle's speed drops by
50% in one s.
8 - LIST OF ADVANCED FUNCTIONS G100 (programmable).
8.1
•
Select automatic door lock mode.
This makes it possible to have the doors close automatically at a pre - set speed or within
20 s after the ignition key is turned ON. In this case the doors are automatically unlocked
when the ignition key is turned OFF.
8.2
•
Autodoor lock (AMERICAN STYLE).
If the American Style closing is activated, ref. Section "Programming closing times". To
correctly carry out the function, activate also line 4 page 2 in the programming tables. In
this way when the ingnition key is switched OFF, the driver door will be unlocked.
8.3
•
Anti - diversion allarm door closing.
This function adds door - closing to the anti - diversion alarm procedure.
46
COMPLETE INSTRUCTIONS G100