Cobra G100 Complete Instructions page 26

15 - HOW TO PROGRAMME THE SYSTEM G100.
15.1 - Programmation.
To access the programming function, the system must be disarmed, the door and
bonnet must be open and the ignition must be turned on (+15 present). Press
radiocontrol button "A" and keep it pressed down; if all the necessary conditions are
present the LED on the control panel will light up and after about 3 s the system will
respond by flashing the direction arrows to indicate that you have entered the programming
function and are in the buzzer table (buzzer volume adjustment).
Press radiocontrol button "A" to raise the buzzer volume, press radiocontrol button
"B" to lower it. To move to next table turn the panel button to position OFF and then ON.
The system always confirms the change of table by the flashing of the indicator lights: the
number of flashes corresponds to the number of the relative table. This signal will be
emitted about every 10 s to remind you of the number of the page where you are
positioned.
15.2 - How to enable / disable a function.
After accessing one of the tables, press radiocontrol button "A" and position yourself
on the line number corresponding to the function you want to enable / disable. Fast
flashing indicates that the function is deactivated, whilst slow flashing indicates that it is
active. The number of flashes will be the same as that of the line in the functions table that
you have selected. To enable / disable a function, press radiocontrol button "B".
Several functions on the same page can be enabled at the same time. Enabling one
function does not automatically disable the others. When you have finished, close the
vehicle's bonnet and the system will signal by flashing the direction arrows for 3 s that
you have exited the programming procedure.
Beside the tables, in which you will find the programmable functions subdivided into
buzzer, basic and advanced, the programming procedure is shown in diagram form; this
will be useful as a quick reminder when carrying out the various phases.
57
COMPLETE INSTRUCTIONS G100