Cobra G100 Complete Instructions page 14

7 - LIST OF BASIC FUNCTIONS G100.
As the functional characteristics of this system can be personalised, the installer will
have clearly marked in this manual which of them are enabled. The standard factory
setting is the one indicated by a dark square.
7.1
•
Controlled comfort window closing.
When arming, if radio control button "A" is kept pressed down the windows close in
controlled comfort mode. This makes it possible to stop the window rising by releasing the
button.
7.2
•
Window control delay activation.
If radiocontrol window output is enabled, when this function is activated the windows
will rise with a delay of 1 s after closing the doors.
7.3 Silent arming.
•
For temporary elimination of the buzzer signal when arming the system, press radiocontrol
button "A" before turning OFF the ignition. The next time it is armed, the buzzer will start
working again.
7.4
•
Armed / Disarmed blinker.
The system signals it has been armed with two blinks of the direction lamps, and signals
that it has been disarmed with one blink. If this function is disabled, the direction lamps
blink only when an alarm cycle is triggered.
7.5
•
Automatic system arming.
Once the ignition key has been turned OFF and the last door is closed a 20 s countdown
starts, at the end of which the system is automatically armed without locking the doors.
7.6
•
Automatic engine cut-off .
The engine block is automatically activated 2 min. after the ignition key has been turned
OFF. The LED will flash. The engine cannot be started up now; to disarm the system it is
necessary to press radio control button "B".
COMPLETE INSTRUCTIONS G100
45