Operation Introduction For Control Panel - Gree GPH12AO-K5NNA1A Owner's Manual

Operation Introduction for Control Panel

Name of control panel
WiFi indicator
Fan speed indicator
Notice
After putting through the power, the air conditioner will give out a sound. After that, you can operate the
air conditioner by the control panel.
Under ON status, after each pressing of the button on control panel, the air conditioner will give out a sound.
Meanwhile, corresponding indicator on control panel will be bright.
Under OFF status, dual-8 nixie tube on control panel won't display. Under ON status, dual-8 nixie tube on
control panel will display set temperature under cooling mode and Heating mode (Cool&Heat Unit only),
while it won't display under other modes.
Operation of control panel
1
ON/OFF button
Pressing this button can turn on or turn off
the air conditioner.
2 + / - button
Under cooling or heating mode, press "+" or
"-" button to increase or decrease set tem-
perature by 1°C (°F). Set temperature range
is 16°C(61°F)~30°C(86°F) . Under auto, dry
or fan mode, this button is invalid.
3 Fan button
Press this button and the fan speed will circ-
ulate as:
low speed
auto fan
4 Mode button
Press this button and the mode will circulate
as:
Heat
(Cool&Heat Unit only)
Swing indicator
Fan button
Swing button
medium speed
high speed
Cool Dry
Fan
Timer indicator
+ / - button
Dual-8 nixie tube
Timer button
Cool: Under this mode, cooling mode indicator
is bright. Dual-8 nixie tube displays set temp-
erature. Temperature setting range is 16°C
(61°F)~30°C(86°F)
Dry: Under this mode, drying mode indicator
is bright. Dual-8 nixie tube won't display.
Fan: Under this mode, the air conditioner only
blow fan. Fan indicator is bright. Dual-8 nixie
tube won't display.
H ea t (Cool&Heat Unit onl y ) : Under this mode,
h eating mode indicator is bright. Dual-8 nixie
tube displays set temperature. Temperature s-
etting range is 16°C(61°F)~30°C(86°F).
5 Timer button
Press this button and the mode will circulate
according to below sequence:
Press timer button to enter into timer setting
mode. Under this mode, press "+" or "- " button
to adjust the timer setting. Timer setting will
increase or decrease 0.5 hour by pressing " + "
or " - " button within 10 hours, while timer se-
tting will increase or decrease 1 hour by pressing
"+" or " - " button beyond 10 hours. After timer
Dry mode indicator
Cool mode indicator
Fan mode indicator
Mode button
Heat mode indicator
(Cool&Heat Unit only)
ON/OFF button