Operation Introduction For Control Panel - Gree GPC07AQA-K5NNA1A Owner's Manual

Operation introduction for control panel

Name of control panel
Fan speed indicator
NOTICE
After putting through the power, the air conditioner will give out a sound . After that, you can operate the
air conditioner by the control panel.
Under ON status, after each pressing of the button on control panel, the air conditioner will give out a sound.
Meanwhile, corresponding indicator on control panel will be bright.
Under OFF status, dual-8 nixie tube on control panel won't display. Under ON status, dual-8 nixie tube on
control panel will display set temperature under cooling mode and Heating mode (Cool&Hea t Unit only),
while it won't display under other modes.
Operation of control panel
1
ON/OFF button
Pressing this button can turn on or turn off
the air conditioner.
2 + / - button
Under cooling mode, press "+" or "-" button
to increase or decrease set temperature by
1°C(°F). Set temperature range is 16°C
(61°F)~30°C(86°F). Under auto, dry or fan
mode, this button is invalid.
3 Fan button
Press this button and the fan speed will circ-
ulate as:
low speed
auto fan
4 Mode button
Press this button and the mode will circulate
as:
Cool
+ / - button
Sleep button
Fan button
medium speed
high speed
Dry
Fan
Dual-8 nixie tube
Timer button
ON/OFF button
Cool: Under this mode, cool mode indicator is
bright. Dual-8 nixie tube displays set tempera-
ture. Temperature setting range is 16°C
(61°F)~30°C(86°F).
Dry: Under this mode, dry mode indicator is
bright. Dual-8 nixie tube won't display.
Fan: Under this mode, the air conditioner only
blow fan. Fan mode indicator is bright. Dual-8
nixie tube won't display.
5 Timer button
Press this button and the mode will circulate
according to below sequence:
Press timer button to enter into timer setting
mode. Under this mode, press "+" or "- " button
to adjust the timer setting. Timer setting will
increase or decrease 0.5 hour by pressing " + "
or " - " button within 10 hours, while timer se-
tting will increase or decrease 1 hour by pressing
"+" or " - " button beyond 10 hours. After timer
setting is finished, the unit will display temper-
ature if there's no operation for 5s. If timer fun-
ction is started up, the upper indicator will keep
5
Cool mode indicator
Dry mode indicator
Fan mode indicator
WiFi indicator
Mode button