Disassembly Of Heat Discharge Pipe - Gree GPH12AO-K5NNA1A Owner's Manual

Disassembly of Heat Discharge Pipe

Optional 1:
Disassemble for installation in dou-
ble window
1. Remove joint A:
Press the clasp and lift joint A upwards to remove it.
joint A
2. Remove Window adapter(top) + Window adap-
ter(bottom) from outdoors.
Window adapter(top)
Window adapter(bottom)
Optional 2:
Disassemble for installation in sash
window
1. Remove joint A:
Press the clasp and lift joint A upwards to remove it.
joint A
2. Remove the window adapter. Pull out
and remove the window adapter by
pushing down two "PUSH" markings,
and slide and close the exhaust cover
in the window panel. (Optional)
"PUSH"
Groove
Groove
"PUSH"
19
Optional 3:
Disassembly for installation in window
1. Remove joint A:
Press the clasp and lift joint A upwards to remove it.
joint A
2. Remove joint F:
remove joint F from joint H.
Joint
Optional 4:
Disassembly for installation in imm-
ovable window
1. Remove joint A:
Press the clasp and lift joint A upwards to remove it.
joint A
2. Remove the heat discharge pipe from the joint D.
Groove
Joint H
Groove
Joint D