Setting The Working Pace - Brother Z-8550B Instruction Manual

Setting the working pace

The target counter can be used to let you know the state of work progress.
The target counter increases by 1 each time the time set as the working pace has elapsed.
However, counting is not carried out during the period from when the power is turned on until sewing starts.
1
Press [ ] > [Production counter editing].
2
Press .
The sewing machine will switch to working pace setting mode.
• If the operating status (1) for the target counter is set to OFF, the target counter function will not operate. It
will not be possible to set the working pace at this time either.
• Press to set the operating status to
3
Press or
• The working pace can be set to between 00'01" and 59'59".
• If you would like to return the setting to the value which was set previously, press
4
Press .
The value will be confirmed and the mode will return to production counter editing mode.
to change the working pace value.
, so that the working pace can be set.
.
68