Adjusting The Forward/Back Position Of The Feed Dog - Brother Z-8550B Instruction Manual

Adjusting the forward/back position of the feed dog

The clearance between the feed dog (1) and the needle
plate should be the same at the front and back of the
feed dog (1) when the feed dog (1) is moved to its
furthest forward and furthest back positions by turning
the machine pulley.
1
Tilt back the machine head.
2
Loosen the two screws (2).
3
Turn the feed rocker bracket arm (3) to adjust the
forward/back position of the feed dog (1).
4
Securely tighten the two screws (2).
Related Information
• Points to note when making adjustments on page 103
• Adjusting the feed dog angle on page 109
110