Initializing The Currently-Selected Program; Setting The Working Pace - Brother S-7220D Instruction Manual

Initializing the currently-
selected program
If you would like to recreate the program which is
currently selected from the beginning, you can
reinitialize the program instead of deleting each step
one by one.
1
Press [ ] > [Program setting] >
[Selected program Reset].
2
Press .
The program will be initialized.
3
Press .
The display will return to to the program setting
screen.

Setting the working pace

The target counter can be used to let you know the
state of work progress.
The target counter increases by 1 each time the time
set as the working pace has elapsed.
However, counting is not carried out during the period
from when the power is turned on until sewing starts.
1
Press [ ] > [Production counter
editing].
2
Press .
The sewing machine will switch to working pace
setting mode.
• If the operating status (1) for the target counter
is set to OFF, the target counter function will not
operate. It will not be possible to set the working
pace at this time either.
• Press to set the operating status to
, so that the working pace can be set.
3
Press or
value.
• The working pace can be set to between 00'01"
and 59'59".
• If you would like to return the setting to the
value which was set previously, press
to change the working pace
.
33