Permobil X850 Corpus 3G User Manual page 151

X850 Corpus 3G
Troubleshooting
Alarms can belong either to the "user-remedied error" category or
the "engineer-remedied error" category.
Check first whether an alarm belongs to the "user-remedied error"
category. These alarms/warnings are indicated without unit
affiliation. These "user-remedied errors" are indicated by the battery
indicator flashing/"flowing" or in some cases by one/some of the
LEDs flashing. If both the battery indicator and some of the LEDs
flash, the alarm belongs to the "engineer-remedied error" category.
When an alarm belongs to the "engineer-remedied error" category,
i.e. a combination of flashing LEDs and battery indicator, the
combination of the LEDs indicates the unit producing the alarm,
while the battery indicator indicates which alarm the unit is
producing (TP1:1-10) (TP2:1-20). These indications are called error
codes.
Each part of the electronics on the wheelchair (for example panel,
motor controller) can, in the event of an alarm, transmit error codes
which are displayed on the panel's LEDs (LED 1 – LED 6) and
battery indicator. LED 1 to LED 6 show which part of the
wheelchair's electronics has a problem. The battery indicator LEDs
1-10 show which error has occurred.
When the panel receives an error code, its source is displayed. At the
same time, a signal is heard. The signal varies depending on how
serious the error is.
151