X850 Corpus 3G
4.2.2.2
Resetting released brakes
WARNING!
Wheel locks
Never use the wheelchair on a sloping surface with the brakes released.
Always ensure that the wheelchair is switched off when the brakes are
released/activated.
To prevent the wheelchair from rolling away, ensure that it is on a dry, level
surface before releasing the brakes.
Anyone who pushes a wheelchair with the brakes released must ensure
that this can be done safely without risks.
Always reset the brake release after moving the wheelchair manually.
When the brakes are released, it should not be possible to drive the
wheelchair. If the wheelchair can still be driven, contact your service
contact or Permobil immediately.
102
Preparing for use