Lochinvar EcoSword LGC 160-210 G P CE Installation, Commissioning, User & Maintenance Instructions page 45

c
0312582_EcoSword_V4.0, 03-05-2021
5 - use this part to connect the air inlet and flue gas outlet to the water heater
Fig. Example parallel venting system
Refer to the table for the correct pipe dimensions of the C13 or a C33 parallel venting
systems.
Description
Diameter flue discharge/
air inlet
Maximum length air inlet
Maximum length flue gas
outlet
L 45°-bend
equivalent
L 90°-bend
equivalent
Caution
Always make sure the installation is in compliance with the requirements stated in this
table.
Caution
Use a special adapter box to convert the concentric connection on the water heater to a
parallel connection. This adapter box converts the 80/125 mm to two times 80 mm. This
adapter (LV312209) can be ordered at your supplier or wholesaler. The use of a different
adapter box may cause the water heater to malfunction.
Unit
mm/mm 80/80
m 50
m 50
m 1,1
m 3,9
80/80
75
75
1,1
3,9
45