Welbilt FRYMASTER FilterQuick easyTouch Operation Manual page 69

DISPLAY
BOIL OUT (OR COLD CLEAN) NOW?
SAVING OIL?
IS OIL DISPOSED?
REMOVE FILTER PAN
IS FILTER PAN EMPTY?
INSERT FILTER PAN
DISPOSE OIL IN FILTER PAN AND
RESTART CLEAN
DRAIN TO FILTER PAN?
DRAINING
IS FRYPOT EMPTY?
3. Press the down arrow.
4. Select CLEAN.
5. Press the √ (check - YES) button to continue. If the X (NO)
button is selected, the user returns to the filtration menu.
If no pan is detected, the controller displays INSERT PAN
until the pan is detected.
6. Press the √ (check - YES) button if saving the oil and the oil is
to be reused skip to step 8. If the X (NO) button is selected,
continue to next step.
7. If the oil HAS already been disposed and the frypot is empty,
press the √ (check - YES) button and skip to step 8. If the oil
HAS NOT been disposed, press the X (NO) button and skip to
step 13.
8. Carefully pull the filter pan from the fryer.
Remove the filter pan slowly to avoid splashing of hot
oil that may cause severe burns, slipping and falling.
9. If the oil IS NOT being saved, and the filter pan is empty,
press the √ (check - YES) button and skip to step 25. If the oil
IS being saved and the filter pan is empty, press the √ (check
- YES) button and continue to next step. Press the X (NO)
button if oil is in the filter pan and continue to step 11.
10. Push the filter pan fully into place and continue to step 12.
11. Press the √ (check - YES) button and skip to step 46. Dispose
of the oil in the filter pan by using the fill vat from pan option
and then the dispose option. Once finished start the clean
function again.
12. Press the √ (check - YES) button to drain the oil to the filter
pan.
13. No action required as oil drains into filter pan.
14. Press the √ (check - YES) button when the frypot is empty to
continue.
If the oil IS being saved, proceed to step 16.
2-18
ACTION
DANGER