Welbilt FRYMASTER FilterQuick easyTouch Operation Manual page 53

generated. Follow the instructions on the controller to clear the error, complete the filter and return ALL
the oil.
Keep all items out of drains. Closing actuators may cause damage or injury.
2.1.2 Quick Filter on Demand
Quick Filter on demand filtration is used to manually start a quick filter. Note: Simultaneous filtering of
multiple vats cannot occur.
DISPLAY
QUICK FILTER NOW?
OIL LEVEL TOO LOW
MANUALLY FILL VAT
START QUICK FILTER
DRAINING
FLUSHING
DANGER
1. The fryer MUST be at setpoint temperature. Press the
filtration menu button.
The filtration button is yellow if a bypass has occurred.
If the filtration button is red, more than one bypass has
occurred.
2. Select QUICK FILTER. QUICK FILTER is highlighted in
yellow in the filter menu if a bypass has occurred.
3. Press the √ (check - YES) button to start filtration. If the
X (NO) button is selected, filtering is cancelled, and the
fryer resumes normal operation. The filtration button
changes to yellow on the first bypass and the QUICK
FILTER is highlighted in yellow in the filter menu. On
the second bypass, the filtration button changes to red.
The controller will prompt again soon to filter the oil.
This sequence repeats until a filter is completed.
Pressing the filter button when the color has changed
will allow a filter to be started.
4. Displayed if the oil level is too low. Press the √ (check -
YES) button to acknowledge issue and return to idle
cook mode. Ensure the vat of oil is to the upper oil
level line. If not add oil.
5. Press the BLUE button to start filtration.
6. No action required as oil drains into filter pan.
7. No action required as debris is flushed from the vat.
2-2
ACTION