Mercedes-Benz A-Class Operator's Manual page 449

Display messages Possible causes/consequences and
* Blind Spot Assist is temporarily unavailable.
Blind Spot Assist Currently
Unavailable See Operator's
Manual
* Active Blind Spot Assist is temporarily unavailable.
Active Blind Spot Assist
Currently Unavailable See
Operator's Manual
* When you establish the electrical connection to the trailer, Blind Spot Assist is unavailable.
Blind Spot Assist Not Avail-
able When Towing a Trailer
See Operator's Manual
The system limits have been reached (
Drive on.
#
Once the cause of the problem is no longer present, the system will be available again.
or
If the display message does not disappear, stop the vehicle while paying attention to road and traffic conditions
#
and restart the engine.
If necessary, clean the rear bumper. If the bumper is extremely dirty, the sensors in the bumper may be mal‐
#
functioning.
The system limits have been reached (
Drive on.
#
Once the cause of the problem is no longer present, the system will be available again.
If the display message does not disappear, stop the vehicle while paying attention to road and traffic conditions
#
and restart the engine.
Press the left-hand Touch Control and acknowledge the display message.
#
Display messages and warning/indicator lamps 447
M M Solutions
page 193).
→
page 193).
→