Mercedes-Benz A-Class Operator's Manual page 175

Deactivating the HOLD function
Depress the accelerator pedal to pull away.
#
or
Depress the brake pedal until the ë dis‐
#
play disappears from the multifunction dis‐
play.
The HOLD function is deactivated in the follow‐
ing situations:
Active Distance Assist DISTRONIC is activa‐
R
ted.
The transmission is switched to position j.
R
The vehicle is secured with the electric park‐
R
ing brake.
In the following situations, the vehicle is held by
the transmission position j or by the electric
parking brake:
The seat belt is unfastened and the driver's
R
door is opened.
The engine is switched off.
R
There is a malfunction in the system or the
R
power supply is insufficient.
DYNAMIC BODY CONTROL function
DYNAMIC BODY CONTROL continuously adjusts
the characteristics of the suspension dampers to
the current operating and driving conditions.
The damping is tuned individually for each wheel
and is affected by the following factors:
The road surface conditions
R
Vehicle load
R
The drive program selected
R
The driving style
R
The drive program can be adjusted using the
DYNAMIC SELECT switch.
Driving and parking 173
Parking Assist PARKTRONIC
Function of Parking Assist PARKTRONIC
Parking Assist PARKTRONIC is an electronic
parking assistance system with ultrasound. It
monitors the area around your vehicle using six
sensors 1 in the front bumper and six sensors
in the rear bumper. Parking Assist PARKTRONIC
shows you the distance between your vehicle
and a detected obstacle visually and audibly.
Parking Assist PARKTRONIC is only an aid. It is
not a substitute for your attention to the sur‐
roundings. The responsibility for safe maneuver‐
ing and parking remains with you. Make sure
that there are no persons, animals or objects in