Mercedes-Benz A-Class Operator's Manual page 145

Only operate the following doors using the
garage door opener:
Doors with a safety stop and reversing fea‐
R
ture.
Doors which conform to the current U.S.
R
safety standards.
Requirements:
The vehicle is parked outside of the garage.
R
The engine is switched off
R
Check if the transmitter frequency of the
#
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
R
Driving and parking 143
Press and hold button 1, 2 or
#
wish to program.
Indicator lamp 4 flashes yellow.
% It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
Release the previously pressed button.
#
Indicator lamp 4 continues to flash yellow.
Point remote control 5 at a distance of 1 in
#
(1 cm) to 3 in (8 cm) towards buttons 1,
or 3.
Press and hold button 6 of remote control
#
5 until:
Indicator lamp 4 lights up green contin‐
R
uously. Programming is complete.
Indicator lamp 4 flashes green. Pro‐
R
gramming was successful. Additionally,
synchronization of the rolling code with
the door system must also be carried out.
If indicator lamp 4 does not light up or flash
#
green: repeat the procedure.
Release all of the buttons.
#
3 that you
2