Mercedes-Benz A-Class Operator's Manual page 111

High-beam headlamps
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch in the direction
#
of arrow 1.
When the high beam is activated, the L
indicator lamp for low beam is deactivated
and replaced by the K indicator lamp for
the high beam.
To switch off: press the combination switch
#
in the direction of arrow 1 or pull in the
direction of arrow 3.
High-beam flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal lights
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light flashes
three times.
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
Active Lane Change Assist can:
lengthen turn signal operation for the
R
duration of the lane change if the driver
has activated the turn signal indicator.
automatically activate the turn signal indi‐
R
cator if the driver indicated to turn in that
direction immediately before but a lane
change was not immediately possible.
Light and visibility 109
Activating/deactivating the hazard warning
lights
Press button 1.
#