T
urning on a zone and setting a power level
T
urning on the dual circuit zones
T
he double hyperspeed zone has two cooking areas that you can use,
a central section and an outer section. You can use the central section
(A) independently or both sections (B) at once.
o If you wish to also activate the outer section of the double
hyperspeed zone, you should press the double hyperspeed
dual circuit ON/OFF button (8). The double hyperspeed zone
dual circuit indicator neon (13) will light.
I
MPORTANT: A zone must be selected within 10
seconds of turning the hob on.
o Press the plus (5) button for the zone that
you want to use.
o Adjust the zone between power levels 1
and 9, using the plus (5) and minus (4)
buttons. By holding down either of these
buttons, the value on the zone indicator
(6) will adjust up or down every 0.3
seconds.
o Press the plus (5) button of the
double hyperspeed zone.
o Adjust the double hyperspeed zone
between power levels 1 and 9, using
the plus (4) and minus (5) buttons.
o The central section is switched on.
12
zone