The Hob Timer - Baumatic BTC2.1SSS User Manual

o IMPORTANT: Please note that switching off automatic pre-heating
will not switch off the zone, it will still be necessary for you to do
this manually.

The hob timer

o Touch either the plus (10) or minus (9) buttons of the timer. If
you press the minus button (9) "99" will appear on the timer
display (11), if you press the plus button (10) "00" will appear
on the timer display (11). A "t" symbol will appear on both of
the cooking zone indicators (6).
o After selecting the timer, a zone must be selected within 10
seconds by pressing one of the plus (5) or minus (4) buttons.
You should use these buttons to select your desired power level.
o The zone will switch on and start to heat; a light (12) will switch
on next to the relevant cooking zone indicator (6).
o Use the plus (10) and minus (9) buttons to adjust the time that
appears in the timer display (11).
o Once the minus or plus buttons are released, the countdown will
start immediately.
o The timer will be assigned to the zone that you have switched
on.
o You can adjust the time that has been set, by using the plus
(10) or minus (9) buttons for the timer.
o At the end of the time period that has been set, an acoustic
signal will sound that lasts for 30 seconds, "00" will flash on the
timer display (11) and the selected zone will switch off.
o To cancel the audible alarm, press either the minus (9) or plus
(10) buttons for the timer.
17