My Appliance Isn't Working Correctly - Baumatic BTC2.1SSS User Manual

My appliance isn't working correctly

o The cooking zones are not functioning or will not switch
on.
* It has been more than 10 seconds since the appliance was
switched on. You should switch the appliance on again, using the
ON/OFF button.
* The safety lock has been switched on (see the "Locking the hob
top" section for information on how to turn off the safety lock).
* The safety cut out has been triggered. Press the ON/OFF button
(1) to reset the appliance.
* Check that the mains electrical supply to the appliance is correct
and working. Check the mains fuse.
o The residual heat indicator has not come on after I have
switched a cooking zone off.
* The cooking zone has only been turned on for a short period of
time; therefore it did not go above 60°C.
* IMPORTANT: If the cooking zone does appear to be hotter than
60°C and the residual heat indicator has not come on, you
should call the Baumatic Service Department.
o A humming sound is heard when a cooking zone is
selected.
* This is normal; the sound will disappear when the zone heats up.
o The cooking zones have become discoloured
* This maybe caused by burnt on remnants of food. This will not
affect the working of the appliance. However you should make
sure that the cleaning instructions are being followed regularly.
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact the
Baumatic Service Department on telephone
number (0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
26