Using The Ceramic Hob; Before First Use; Control Knobs; Turning On A Zone And Setting A Power Level - Baumatic B10 Instruction Manual

Using the ceramic hob

Before first use

IMPORTANT: You should clean the ceramic hob surface (see
"Cleaning and maintenance" section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.

Control knobs

o All operations are performed by means of the 4 control knobs
that can be found on the right hand side of the hob top.
o The control knob should be turned clockwise to select a heating
level. The numbers around the outside of each control knob
indicates the power level that you have set the zone to.
o A marking to the bottom right of each control knob, indicates
which zone that it controls.

Turning on a zone and setting a power level

o Press the ON/OFF button to switch on the appliance.
o Turn the control knob clockwise of the zone that you wish to
cook on.
o Each cooking zone can be adjusted between 1 and 6, one being
the coolest zone setting and six being the hottest zone setting.
10