Turning The Hob Off; Residual Heat Indicator; Locking The Hob Top - Baumatic BTC2.1SSS User Manual

T urning the hob off
O nce you have switched off all of the cooking zones, you should turn
off the hob.
R esidual heat indicator
o After a zone is switched off, the corresponding
If you switch off the appliance using the ON/OFF button (1) then
o
only the "H" will appear in the cooking zone indicator (6).
o When the temperature falls below 60°C, then the letter "H" and
"0" will stop alternating (if the hob is still switched on), or the
"H" will go out (if the hob is not switched on).
IMPORTANT: The residual heat indicator will disappear if your
o
mains supply is cut.
L ocking the hob top
o To disable the safety lock feature, you should press the safety
lock button (2) again. The safety lock neon (3) will go out and
you are then able to adjust the power of any zone on the hob
top.
o Press the ON/OFF button (1).
o It is possible to turn the hob off at any time
by pressing the ON/OFF button (1).
cooking zone indicator (6) will show the letter "
alternating with "0". This means that the
temperature of the zone is over 60°C and
therefore high enough to cause injury.
o The whole hob top can be locked by pressing
the safety lock button (2) whilst the appliance
is turned on.
o The safety lock neon (3) will light to show that
the safety lock feature has been switched on.
o When the safety lock feature is activated, it will
disable any of the other buttons on the control
panel, except the ON/OFF button (1).
14
H",
is