Booster Function; Pan Sensor - Baumatic BHI610 User Manual

Booster function

The back right zone has a booster function, when this function is
selected, it increases the power output of that particular zone to 2600
watts.
o Press the ON/OFF button (5)
o The cooking zone indicators (2) will all read "-".
o Press the zone selection button (8) for the back right
zone and set your desired power level using the zone
power level adjustment control (3).
o After 5 minutes the booster function will cease and the back
right zone will return to the power level that you originally set.
The letter "P" will be replaced by the number of the power level
in the cooking zone indicator (2).
o If you use the front right zone whilst the booster function is
being used, it will not heat above power level 2.
o If you wish to cancel the booster function before the 5 minute
time period has elapsed, use the zone selection button for the
back right zone. Then press the booster button (1) again or
press the minus symbol on the zone power level adjustment
control. The zone will return to its original power level.

Pan sensor

Each zone has a sensor on it, so it can detect the presence of a pan.
o The sensor is fine-tuned to detect a pan being
o Press the booster button (1) and the back
right zone will operate at its highest power
level.
o The letter "P" will appear in the cooking zone
indicator (2) whilst the booster function is
operating.
placed on it. The pan should be one size smaller
than the nominal diameter of the zone.
14