Control Box & Soap Supply Connections - Bradley Verge Crestt Series Installation And Maintenance Manual

Installation
3
Control Box & Soap Supply Connections
A
Verify the soap pump is positioned below
the control box lever.
B
Verify the shoulder of the soap pump is
positioned above the control box groove.
C
Make the IR sensor and LED,
connections as shown.
Connections are NOT
interchangeable.
D
Press the soap supply tube over the soap
pump connection as shown.
Bradley • P20-225 Rev. A: ECO 19-15-015A
Soap Supply Tube
from Soap Spout
Assembly
Verge Multi-Feed Soap Tank
®
Power Supply
Connection
IR Sensor Connection
from Soap
Spout Assembly
LED Connection
Spout Assembly
2/12/2020
from Soap
7