Power Supply Connections - Bradley Verge Crestt Series Installation And Maintenance Manual

Verge Multi-Feed Soap Tank
®
6

Power Supply Connections

The multi-feed soap tank assembly
and each of the control boxes require a
power supply connection.
The power supply can be a Bradley
supplied battery pack, a single AC
adaptor, or an AC adapter splitter
assembly kit (see page 3), depending on
the selection made at time of purchase.
A
Connect the power supply to the power
source for the multi-feed tank system.
Connect the power supply to the power
B
source for the multi-feed soap tank
assembly. When the connection is made,
the LED at the base of the soap dispenser
spout will flash green for 0.5 seconds.
16 2/12/2020
Control Box
Connection
Multi-Feed Soap
Tank Assembly
Connection
Bradley • P20-225 Rev. A: ECO 19-15-015A
Installation
Location of the
Power Source
Connection
Location of the
Power Source
Connection