Safety Information; Supplies Required - Bradley Verge Crestt Series Installation And Maintenance Manual

Verge Multi-Feed Soap Tank
®

Safety Information

Caution
A DC plug-in adapter (supplied by Bradley) should be used in conjunction with the Bradley soap dispenser products. The DC
plug-in adapter supplied by Bradley is 6V DC regulated. Direct connection to 120V/22V 50/60Hz could result in personal injury and
will damage the sensor.
Important
Separate parts from packaging and make sure all parts are accounted for before discarding packaging material. If any parts are
missing, do not begin installation until you obtain the missing parts.
Troubleshooting and internal maintenance must be performed by qualified service personnel.

Supplies Required

• (1) dedicated 120VAC, 20A GFCI outlet(s), if an A14-029 or A14-031 AC adapter is selected
• Drill
• 1/4" drill bit
• Tape measure
• Phillips screw driver
• Level
• Pencil
• Tubing cutter
2 2/12/2020
Bradley • P20-225 Rev. A: ECO 19-15-015A
Installation