Adding Soap To Multi-Feed Soap Tank Assembly - Bradley Verge Crestt Series Installation And Maintenance Manual

Installation
7

Adding Soap to Multi-Feed Soap Tank Assembly

When the soap level is at approximately 25%
capacity, the LED indicator on the fill port hub
assembly will flash red, indicating low soap
levels.
Soap tank capacity is 166.5 oz (5026 mL).
A
Remove the fill port cap from the fill port hub
assembly using the supplied 3 mm Allen wrench.
Set the fill port cap aside.
B
Slowly pour the soap into the fill port hub assembly.
To prevent overfilling, the LED indicator on
the LED indicator will turn solid red and an
audible indicator will sound for 2.5 seconds,
indicating that soap levels are at 90%
capacity.
C
Replace the fill port cap into the fill port hub
assembly and hand-tighten.
Initial installation requires multiple activations
to prime each soap spout dispenser.
Bradley • P20-225 Rev. A: ECO 19-15-015A
Fill Port Cap
3 mm
Allen Wrench
2/12/2020
Verge Multi-Feed Soap Tank
®
Fill Port Hub
Assembly
17