Bradley Verge Crestt Series Installation And Maintenance Manual page 9

Installation
D
Carefully remove the fill port hub assembly
from the soap tank assembly.
LED and sensor wires are not shown
in this view for clarity purposes.
E
Remove the mounting nut from the fill port hub
assembly.
Install Multi-Feed Components
A
Insert the fill port ring into the fill port hub and
align the mounting holes. Secure in place using
the four fill port screws.
B
Insert the fill port cap into the fill port ring. Use
the 3 mm Allen wrench (provided with spout
assembly) to secure fill port cap in place.
Bradley • P20-225 Rev. A: ECO 19-15-015A
Low Soap
Sensor
Fill Port
Screws
2/12/2020
Verge Multi-Feed Soap Tank
®
Fill Port Hub
Assembly
Mounting Nut
Overflow
Sensor
Soap Tank
Assembly
3 mm
Allen Wrench
Fill Port Cap
Fill Port Ring
Fill Port
Screws
Fill Port Hub
9