Figure 6-7 Remove A Power Module - Huawei OceanStor S2600 Manual

OceanStor S2600 Storage System
Troubleshooting
l
l
l
Precaution
When replacing a power module, pay attention to the following:
l
l
To avoid electrical shock, do not touch the connectors of electrical wires and communication
cables.
Procedure
Step 1 Wear an ESD-preventive wrist strap, ESD-preventive gloves, or ESD-preventive clothes.
Step 2 Remove the power cable.
Step 3 As shown in
hold the power module handle to pull out the power module.

Figure 6-7 Remove a power module

Step 4 Put the removed power module into the ESD-preventive bag.
Issue 03 (2010-01-28)
ESD-preventive clothes
ESD-preventive bag
Tag
Remove and insert a power module with equal force; otherwise, too much force may cause
damage to the physical appearance or plug-ins.
When replacing a power module, you must remove the power module and install a new
power module within two minutes.
DANGER
NOTE
The procedure for removing a DC power module is the same as that for removing a AC power module.
This section takes the AC power module in the controller enclosure as an example.
Figure 6-7, press the spring leaf of the power module in the arrow direction and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Replacing Parts
6-11