Troubleshooting Table; Problems With Operation - Hanseatic HGVI6082D127711DS User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may re-
■
pair the dishwasher. If in doubt,
contact our service department
(see page EN-38).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers
■
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem
The dishwasher cannot be
switched on.
The selected dishwashing
programme will not start or it
stops.
Troubleshooting table
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
If water overfl ows, switch off the water
■
supply immediately and then contact
the service team (see page EN-38).
If the water has overfl owed, remove
■
any water standing in the dishwash-
er before relaunching a dishwasher
programme.
Possible cause
The mains plug has not been
inserted into a socket.
There is no voltage being sup-
plied through the socket.
The dishwasher door is not
properly closed.
The water tap is not on
properly.
The inlet hose is defective.
There is a risk of overflowing.
The aqua stop system has
been activated.
Page EN-35
Solution
Insert the mains plug into the
socket.
Check the fuse. Check the
socket by connecting another
device.
Close the dishwasher door.
Turn the water tap on
completely.
Contact our Service Centre
(see page EN-38).