Adding Dishwasher Salt - Hanseatic HGVI6082D127711DS User Manual

Page EN-16 Dishwasher detergents, rinse aids and dishwasher salts

Adding dishwasher salt

NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface, its seals and
fi lters by using dishwasher salt in an im-
proper manner.
Only use dishwasher salt which is suit-
■
able for dishwashers.
Always wipe away spilt dishwasher
■
salt immediately with a damp cloth.
Immediately after adding the dish-
■
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher
salt to the dishwasher salt dispenser
– if you are only using multitabs which al-
ready contain dishwasher salt,
– if the water hardness in your area is in the
0–5° dH range.
Add dishwasher salt before first use and
when the display (8) lights up.
(8)
(17)
1. Remove the lower dish rack.
2. Turn the cover on the dishwasher salt dis-
penser (17) anticlockwise and remove it.
(b)
3. Place the supplied filling funnel (b) on the
dispenser opening.
4. Fill the dishwasher salt dispenser with
1.5 kg of dishwasher salt. Water may
come out; this is not a problem.
5. Stir the dishwasher salt using the end of a
spoon or similar.
6. Turn the cover of the dishwasher salt
compartment in a clockwise direction up
to the stop point.
7. Replace the lower dish rack.
8. Launch a wash programme straight away
or carry out a test run immediately upon
first use.