Table of Contents
Advertisement
Video Over IP Web-GUI - EL-4KPM-VIP-TX - Transmitter
The menu structure for the built-in Web-GUI is as follows:
System:
Version Information:
This gives the user an overview of the individual unit you are connected to, including model number and firmware version
Update Firmware:
It may be necessary to update the firmware of the ELAN Video Over IP products. It is advised to check the ELAN website to see if any
firmware updates have been uploaded. Download these files and save them to your PC.
To update the ELAN EL-4KPM-VIP-TX & EL-4KPM-VIP-RX please follow the below instructions:-
Click 'Update Firmware'
1)
Click 'CHOOSE FILE' and open the folder in which you have saved the ELAN Firmware Update PC PROGRAM/Web GUI files.
2)
Select the required 'Transmitter.BIN' or 'Receiver.BIN' file
3)
Click 'UPLOAD' which will begin the firmware upgrade process
4)
Once the upgrade has completed please disconnect the network cable/power and re-connect to reboot the product.
The Transmitter/Receiver display will no longer display 'PG' when complete.
Please note:
DO NOT unplug the power or network connection to the EL-4KPM-VIP-TX/RX as this may result in failure to upgrade firmware,
which may lead to possible failure of the unit.
Firmware upgrade process will take several minutes. Do not connect any other ELAN product that has the same IP address
during this time.
contact
techsupport@elanhomesystems.com
EL-4KPM-VIP-CTRL/TX/RX
USER MANUAL
42
Advertisement
Table of Contents
