Transmitter Summary - Elan Video Over IP User Manual

Transmitter Summary

The ELAN Video Over IP Transmitter summary window gives an overview of all of the Transmitter products that have been configured in
the system, with the ability to update and add to the system.
Features of the Transmitter summary page include:
1. Transmitter summary (page drop down) - each page can show a summary of 10 Transmitter products connected to the system. To
view further products in the system select further pages from the drop-down box.
2. ID/Input - automatically assigned during the PC wizard configuration. This number is used for control of the Video Over IP system
using third party drivers.
3. Name - configured during the PC wizard configuration, can be amended using the Configuration Update button on the same page.
4. IP Address - the IP address assigned to the unit during configuration, can be amended using the Configuration Update button on the
same page.
5. Status - shows the online / offline status of a product
6. F/W Version - this should marry up with the firmware version that you can find on the ELAN website (see page 21 for more details)
7. EDID - allows you to fix the EDID value for each Transmitter (source)
8. Refresh - will refresh the product details shown. When the Transmitter summary window is first selected you will need to press
'Refresh' in order to display system details.
9. Apply - press apply once any details or settings have been updated within this page
10. Select Transmitter - when using the three function in this section of the page (Reboot / Configuration / Replace) you must first use the
drop down box to select the Transmitter you wish to address
11. Reboot Product - you must select the Transmitter to reboot (using the adjacent drop-down selection box) prior to pressing 'Reboot
Products'
12. Configuration Update - allows you to update the IP address, name and Video Over IP/unicast settings of each Transmitter. You must
select the Transmitter using the adjacent drop-down selection box prior to pressing 'Configuration Update'
13. Replace Transmitter - should an ELAN EL-4KPM-VIP Transmitter unit become faulty, the PC program has a simplified way of replacing
the product. Please see page 29 for detailed instructions.
14. Add Transmitter - if an additional Transmitter is required in the system the PC wizard will assist in configuring the new EL-4KPM-VIP-
TX to become part of the existing system setup. This process is the same process as described in 'NEW PROJECT CONFIGURATION'
(page 24).
30
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL