Infrared Pass-Through (Source Control) - Elan Video Over IP User Manual

Infrared Pass-Through (Source Control)

The Video Over IP products feature Infrared pass-through, allowing users to use original source remote controls in the field and control
those sources located in another area.
The IR signal is routed to only the current source that is selected, meaning that individual source control can be achieved with
installations consisting of multiple source equipment of the same type, such as multiple satellite boxes of the same make and model.
VIDEO OVER IP
CH Select CH
HDMI IN
24 56V - 0 . 5A
SOURCE 01
Note: The IR pass-through features are available in all modes of Video Over IP use (matrix mode, video-wall, one-to-one and one-to-
many).
Connections:
The IR receiver is connected to the IR RX socket on the EL-4KPM-VIP-RX.
The IR emitter is connected to the IR TX socket on the EL-4KPM-VIP-TX and located on the IR receiver window of your source device.
12
Lan PoE PWR
Link
EL-4KPM-VIP-TX
RX TX GND
IR IR
TX
RX TX LINE IN RS-232
24 56V -
RX TX GND
IR IR
CH Select
TX RX RS-232
HDMI IN
0 . 5A
EL-4KPM-VIP-CTRL/TX/RX
VIDEO OVER IP EL-4KPM-VIP-TX
CH Select
CH
EL-4KPM-VIP-TX
VIDEO OVER IP
CH Select CH
HDMI IN
IR IR
HDMI IN
IR IR
24 56V - 0 . 5A
RX TX LINE IN
24 56V - 0 . 5A
RX TX LINE IN
RX TX GND
IR IR
RX TX GND
VIDEO OVER IP
IR IR CH Select
CH
TX RX RS-232
VIDEO OVER IP
CH Select
CH
TX RX RS-232
RX
L /R
HDMI Out
RX
L /R
HDMI Out
ZONE 01
VIDEO OVER IP
CH
RX TX
IR IR
TX LINE IN RS-232
RX
www.elanhomesystems.com
USER MANUAL
Lan
PoE PWR
Lan Link
PoE PWR
Link
RX TX GND
RX TX GND
TX
RS-232
TX
RS-232
EL-4KPM-VIP-RX
EL-4KPM-VIP-RX
Link
Link
24 56V - 0 . 5A
24 56V - 0 . 5A
EL-4KPM-VIP-RX
Link
GND
TX