Table of Contents
Advertisement
EL-4KPM-VIP-CTRL Enabling TFTP & Telnet
Prior to firmware updating the EL-4KPM-VIP-CTRL you must activate both TFTP and Telnet features on your computer. This is achieved
using the following steps below:-
1.
In Windows, navigate to Start -> Control Panel -> Programs and Features
2.
In the Programs and Features screen, select Turn Windows features on or off in the navigation bar on the
3.
Once the Windows Features window populates, scroll down and make sure "TFTP client" and "Telnet
Client" are both selected.
4.
Once the progress bar fills and the pop up disappears, the TFTP client is enabled.
39
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL
left.
Advertisement
Table of Contents
