Firmware Update Via Pc Program - Elan Video Over IP User Manual

EL-4KPM-VIP Firmware Update via PC Program
To update the firmware in either of the Transmitter or Receiver Video Over IP products using the ELAN PC program please follow the
below steps:
1) Open the ELAN PC Program
2) Select the 'ADVANCED' tab in the side menu. In the following screen you will see the 'Firmware Update' option on the Advanced
settings page
3) Select the product you wish to update (Transmitter or Receiver) from the drop-down box. If the product is a new default unit select
'New Product - Default IP 169.254.100.254'
4) Click the corresponding 'Update' button
A warning window will open and request that the product is put into Firmware Update Mode - see page 19
5) Download the most recent EL-4KPM-VIP-TX or -RX firmware from the ELAN website.
Click 'Browse' and open the folder in which you have saved the ELAN EL-4KPM-VIP-TX/RX firmware files.
6) Select the required 'Transmitter.BIN' or 'Receiver.BIN' file
7) Click 'Upload' which will begin the firmware upgrade process
8) Once the upgrade has completed please disconnect the network cable/power and re-connect to reboot the
product. The Transmitter/Receiver display will no longer display 'PG' when complete.
Please note:
DO NOT unplug the power or network connection to the EL-4KPM-VIP-TX/RX as this may result in failure to upgrade firmware,
which may lead to possible failure of the unit.
The firmware upgrade process may take several minutes. Do not connect any other ELAN product that has the same IP address
during this time.
22
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL