New Project Configuration - Elan Video Over IP User Manual

New Project Configuration

The ELAN PC Program includes a wizard for configuring all components of the Video Over IP system. It has been designed to include
a simple step-by-step tutorial that will guide you through the setup procedure, resulting in a system in which all components are
assigned a name and IP address ready for basic system use.
It is important to follow the wizard instructions. Failure to do so will result in incorrectly configured Video Over IP products.
Please see below summary of the setup process:-
1) Connecting your PC to the network switch/Video Over IP product
In order to configure the ELAN Video Over IP products your PC must first be physically connected to the products, this can be
acheived by:
a) A PoE network switch using a Ethernet network cable which is in turn connected to the ELAN
EL-4KPM-VIP-TX/RX products
b) Connected directly to the ELAN EL-4KPM-VIP product which must be powered locally using a
24-56V DC power supply
In order to be able to communicate with the ELAN IP products your computer must also be in the same IP range as the ELAN EL-
4KPM-VIP-TX/RX default IP address. If you are unsure how to update your computer IP range follow the 'Changing your computer
IP address' instructions at the rear of this guide.
Click 'YES' to continue with the wizard configuration
24
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL