Video Wall - Elan Video Over IP User Manual

Video Wall

ELAN Video Over IP receivers can be set up to be part of a video wall array. Each system can contain mulitple video wall arrays of
differing sizes. Each video wall can be assigned a number of screens and different layouts that range from 1x2 up to 16x16.
Features of the Video Wall setup page include:
1. Bezel and Gap Compensation - this allows you to alter the overall size (OW) and visable image (VW) displayed per screen. This
allows you to compensate for the size of each screen bezel, alternatively any gaps in-between screens.
2. Wall Size and Position - this is broken down into 4 settings:
Vertical Monitor Count = how many screens there are vertically (overall video wall array size)
Horizontal Monitor Count = how many screens there are horizontally (overall video wall array size)
Vertical Monitor Position = assigns the vertical location of one individual EL-4KPM-VIP-RX Receiver.
For example the top row of screens are all vertical location 1.
Horizontal monitor position = assigns the horizontal location of one individual EL-4KPM-VIP-RX Receiver.
For example the left column of screens are all horizontal location 1.
3. Stretch Type - adjusts the picture to fit to new video wall confuration size. There are 2 modes:
Fit In - displays the normal aspect ratio of the image as output by the source (usually 16:9)
Stretch Out - will 'stretch-to-fit' the image into the video wall array area
4. Clockwise Rotation - each screen image can be adjusted to rotate through 0, 90, 180 & 270 degrees.
5. 'Apply To' - once you have made changes to video wall configuration you can select the Receiver that you wish to apply the
changes to from the drop-down box and click 'Apply'
Please note: each Video Over IP Receiver must be configured individually to be part of a video wall configuration. When being
controlled via a third party control system each EL-4KPM-VIP Receiver needs to be sent the relevant video wall switching command
individually.
36
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL