Receiver Summary - Elan Video Over IP User Manual

Receiver Summary

The ELAN Video Over IP Receiver summary window gives an overview of all of the Receiver products that have been configured in the
system and the ability to update and add to the system.
Features of the Receiver summary page include:
1. Receiver summary (page drop down) - each page can show a summary of 10 Receiver products connected to the system. To view
further products in the system select further pages from the drop-down box.
2. ID / Output - automatically assigned during the PC wizard configuration. This number is used for control of the Video Over IP
system using third party drivers.
3. Name - configured during the PC wizard configuration, can be amended using the Configuration Update button on the same page.
4. IP Address - the IP address assigned to the unit during configuration, can be amended using the Configuration Update button on
the same page.
5. Status - shows the online / offline status of a product
6. F/W Version - this should marry up with the firmware version that you can find on the ELAN website (see page 19 for more
details)
7. HDR On/Off - turns on HDR compatibillity - only use on screens that support HDR
8. Resolution - adjust the output resolution using the built-in video scaler inside the EL-4KPM-VIP-RX Receiver. The scaler is cable of
both upscaling and downscaling the incoming video signal.
Output resolutions include:
Pass Through - the Receiver will output the same resolution that the source is outputting (no scaling)
2160p @ 30Hz
2160p @ 24Hz
1080p @ 60Hz
1080p @ 50Hz
720p @ 60Hz
720p @ 50Hz
1280x1024 @ 60Hz
1024x768 @ 60Hz
1360x768 @ 60Hz
1440x900 @ 60Hz
1680x1050 @ 60Hz
32
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL