Scaler Output Settings - Elan Video Over IP User Manual

Scaler Output Control
The ELAN Video Over IP Receiver has an in-built video scaler which can both up-scale and downscale video signals allowing the best
picture quality possible at each display.
Configuration of Video Over IP Scaler settings can be achieved in several ways:-
1 During the manual configuration of the Video Over IP Receiver
2
Using the ELAN Video Over IP PC configuration software
3 Using the Video Over IP Web GUI interface
4 Using RS-232 commands via the ELAN EL-4KPM-VIP-CTRL
When configuring the Scaling during manual setup or using RS-232 commands the following table indicates Scaler settings.
SCALER
00 Passthrough
01 HDMI 1080p@50Hz
02 HDMI 1080p@60Hz
03 HDMI 720P@60Hz
04 HDMI 720P@50Hz
05 HDMI 1280 x 1024@60Hz
06 HDMI 1024 x 768@60Hz
07 HDMI 1360 x 768@60Hz
08 HDMI 1440 x 900@60Hz
09 HDMI 1680 x 1050@60Hz
10 HDMI 4K2K@30Hz
11 HDMI 4K2K@24Hz
contact
techsupport@elanhomesystems.com
VIDEO OVER IP RECEIVER SCALER SETTINGS
EL-4KPM-VIP-CTRL/TX/RX USER MANUAL
19