Type-1 Redirection Mode - 1-To-1 Routed - Elan Video Over IP User Manual

Type-1 Redirection Mode - 1-to-1 Routed RS-232
The Video Over IP products feature bi-directional RS-232 pass-through for control of products using serial commands from a fixed
RX/TX to another. This is also known as Type 1, 1 to 1 routed RS-232 mode. To utilise this you must first enable Type 1 RS-232 mode
as follows.
Type 1 RS-232 Mode Set Up
1) Connect to the Web GUI of the EL-4KPM-VIP-TX or RX that you wish to enable Type 1 mode for by entering its IP Address in
your web browser and navigate to the Functions' tab.
For example: 169.254.6.1 is the default IP address for RX ID 1.
2) Check the checkbox for 'Enable Serial over IP'
3) Select the checkbox for 'Type 1'
4) Select the System tab and navigate to the Utilities section.
Select the Reboot button and restart the Video Over IP unit.
14
EL-4KPM-VIP-CTRL/TX/RX
www.elanhomesystems.com
USER MANUAL